|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
74ALVT16240 16-bit inverting buffer/driver; 3-state Rev. 03 -- 4 July 2005 Product data sheet 1. General description The 74ALVT16240 is a high-performance BiCMOS device designed for VCC operation at 2.5 V or 3.3 V with I/O compatibility up to 5 V. The 74ALVT16240 is an inverting 16-bit buffer that is ideal for driving bus lines. The device features four output enable inputs (1OE, 2OE, 3OE, 4OE), each controlling four of the 3-state outputs. 2. Features s s s s s s s 5 V I/O compatible Live insertion and extraction permitted 3-state buffers Power-up 3-state Output capability: +64 mA and -32 mA Latch-up protection: x JESD 78 exceeds 500 mA Electrostatic discharge protection: x MIL STD 883 method 3015: exceeds 2000 V x Machine model: exceeds 200 V Bus hold data inputs eliminate need for external pull-up resistors to hold unused inputs 16-bit bus interface TTL input and output switching levels Input and output interface capability to systems at 5 V supply No bus current loading when output is tied to 5 V bus s s s s s 3. Quick reference data Table 1: Quick reference data Tamb = 25 C. Symbol Parameter tPLH tPHL Ci Conditions Min 1.0 0.5 1.0 0.5 Typ 2.5 1.7 1.9 1.7 3 Max 3.7 3.0 2.9 2.6 Unit ns ns ns ns pF propagation delay nAx CL = 50 pF; VCC = 2.5 V to nYx CL = 50 pF; VCC = 3.3 V propagation delay nAx CL = 50 pF; VCC = 2.5 V to nYx CL = 50 pF; VCC = 3.3 V input capacitance on nOE VI = 0 V or VCC Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state Table 1: Quick reference data ...continued Tamb = 25 C. Symbol Parameter Co ICC output capacitance supply current Conditions VI/O = 0 V or VCC outputs disabled; VCC = 2.5 V outputs disabled; VCC = 3.3 V Min Typ 9 40 60 Max 100 100 Unit pF A A 4. Ordering information Table 2: Ordering information Package Temperature range Name 74ALVT16240DL -40 C to +85 C SSOP48 TSSOP48 Description plastic shrink small outline package; 48 leads; body width 7.5 mm plastic thin shrink small outline package; 48 leads; body width 6.1 mm Version SOT370-1 SOT362-1 Type number 74ALVT16240DGG -40 C to +85 C 5. Functional diagram 1 1OE 48 2OE 25 3OE 24 4OE 1A0 1A1 1A2 1A3 2A0 2A1 2A2 2A3 3A0 3A1 3A2 3A3 4A0 4A1 4A2 4A3 47 46 44 43 41 40 38 37 36 35 33 32 30 29 27 26 1 4 1 3 1 2 EN1 EN2 EN3 EN4 1 1 2 3 5 6 8 9 11 12 13 14 16 17 19 20 22 23 1Y0 1Y1 1Y2 1Y3 2Y0 2Y1 2Y2 2Y3 3Y0 3Y1 3Y2 3Y3 4Y0 4Y1 4Y2 4Y3 47 46 1A0 1Y0 2 3 36 35 3A0 3Y0 13 14 1A1 1Y1 3A1 3Y1 44 1A2 1Y2 5 33 3A2 3Y2 16 43 1A3 1OE 1Y3 6 32 3A3 3OE 3Y3 17 1 25 2Y0 41 40 2A0 8 9 30 29 4A0 4Y0 19 20 2A1 2Y1 4A1 4Y1 38 2A2 2Y2 11 27 4A2 4Y2 22 37 2A3 2OE 2Y3 12 26 4A3 4OE 4Y3 23 48 24 001aad262 001aad261 Fig 1. Logic symbol Fig 2. Logic diagram 9397 750 15192 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 -- 4 July 2005 2 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 6. Pinning information 6.1 Pinning 1OE 1Y0 1Y1 GND 1Y2 1Y3 VCC 2Y0 2Y1 1 2 3 4 5 6 7 8 9 48 2OE 47 1A0 46 1A1 45 GND 44 1A2 43 1A3 42 VCC 41 2A0 40 2A1 39 GND 38 2A2 37 2A3 36 3A0 35 3A1 34 GND 33 3A2 32 3A3 31 VCC 30 4A0 29 4A1 28 GND 27 4A2 26 4A3 25 3OE 001aad263 GND 10 2Y2 11 2Y3 12 3Y0 13 3Y1 14 GND 15 3Y2 16 3Y3 17 VCC 18 4Y0 19 4Y1 20 GND 21 4Y2 22 4Y3 23 4OE 24 16240 Fig 3. Pin configuration 6.2 Pin description Table 3: Symbol 1OE 1Y0 1Y1 GND 1Y2 1Y3 VCC 2Y0 2Y1 GND 2Y2 9397 750 15192 Pin description Pin 1 2 3 4 5 6 7 8 9 10 11 Description output enable input (active LOW) data output data output ground (0 V) data output data output supply voltage data output data output ground (0 V) data output (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 -- 4 July 2005 3 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state Pin description ...continued Pin 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 Description data output data output data output ground (0 V) data output data output supply voltage data output data output ground (0 V) data output data output output enable input (active LOW) output enable input (active LOW) data input data input ground (0 V) data input data input supply voltage data input data input ground (0 V) data input data input data input data input ground (0 V) data input data input supply voltage data input data input ground (0 V) data input data input output enable input (active LOW) Table 3: Symbol 2Y3 3Y0 3Y1 GND 3Y2 3Y4 VCC 4Y0 4Y1 GND 4Y2 4Y3 4OE 3OE 4A3 4A2 GND 4A1 4A0 VCC 3A3 3A2 GND 3A1 3A0 2A3 2A2 GND 2A1 2A0 VCC 1A3 1A2 GND 1A1 1A0 2OE 9397 750 15192 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 -- 4 July 2005 4 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 7. Functional description 7.1 Function table Table 4: Input nOE L L H [1] H = HIGH voltage level; L = LOW voltage level; X = don't care; Z = high-impedance OFF-state. Function table [1] Output nAx L H X nYx H L Z 8. Limiting values Table 5: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to ground. Symbol VCC IIK VI IOK VO IO Tstg Tj [1] [2] Parameter supply voltage input diode current input voltage output diode current output voltage output current storage temperature junction temperature Conditions VI < 0 V [1] Min [1] Max -50 -50 128 -64 +150 +150 Unit V mA V mA V mA mA C C -0.5 +4.6 -0.5 +7.0 -0.5 +7.0 -65 [2] VO < 0 V output in OFF-state or HIGH-state output in LOW-state output in HIGH-state - The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. 9397 750 15192 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 -- 4 July 2005 5 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 9. Recommended operating conditions Table 6: Recommended operating conditions Conditions Min 2.3 0 1.7 none current duty cycle 50 %; f 1 kHz t/V Tamb VCC VI VIH VIL IOH IOL input transition rise or fall rate outputs enabled ambient temperature supply voltage input voltage HIGH-level input voltage LOW-level input voltage HIGH-level output current LOW-level output current none current duty cycle 50 %; f 1 kHz t/V Tamb input transition rise or fall rate outputs enabled ambient temperature in free air in free air -40 3.0 0 2.0 -40 Typ Max 2.7 5.5 0.7 -8 8 24 10 +85 3.6 5.5 0.8 -32 32 64 10 +85 Unit V V V V mA mA mA ns/V C V V V V mA mA mA ns/V C Symbol Parameter VCC = 2.5 V 0.2 V VCC VI VIH VIL IOH IOL supply voltage input voltage HIGH-level input voltage LOW-level input voltage HIGH-level output current LOW-level output current VCC = 3.3 V 0.3 V 9397 750 15192 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 -- 4 July 2005 6 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 10. Static characteristics Table 7: Static characteristics At recommended operating conditions; voltages are referred to GND (ground = 0 V); Tamb = -40 C to +85 C. Symbol VIK VOH VOL Parameter V [1] VCC = 2.3 V; IIK = -18 mA VCC = 2.3 V to 3.6 V; IOH = -100 A VCC = 2.3 V; IOH = -8 mA LOW-level output voltage VCC = 2.3 V IOL = 100 A IOL = 24 mA IOL = 8 mA ILI input leakage current control pins data pins IOFF IHOLD IEX IPU IPD IOZ VCC = 2.7 V; VI = VCC or GND VCC = 0 V or 2.7 V; VI = 5.5 V VCC = 2.7 V; VI = VCC VCC = 2.7 V; VI = 0 V power-down output current VCC = 0 V; VI or VO = 0 V to 4.5 V bus hold current on data inputs VCC = 2.3 V; VI = 0.7 V VCC = 2.3 V; VI = 1.7 V [3] [3] [2] [2] Conditions Min 1.8 [4] Typ -0.85 2.5 0.07 0.3 0.1 0.1 0.1 +0.1 0.1 90 -10 10 1 1 Max -1.2 0.2 0.5 0.4 1 10 1 -5 100 125 100 100 Unit V V V V V V A A A A A A A A A A VCC = 2.5 V 0.2 input diode voltage HIGH-level output voltage VCC - 0.2 VCC external current into output output HIGH-state; VO = 5.5 V; VCC = 2.3 V power-up 3-state output current VCC 1.2 V; VO = 0.5 V to VCC; VI = GND or VCC - power-down 3-state output VCC 1.2 V; VO = 0.5 V to VCC; current VI = GND or VCC 3-state output current VCC = 2.7 V; VI = VIL or VIH output HIGH-state; VO = 2.3 V output LOW-state; VO = 0.5 V [4] [5] [6] 0.5 +0.5 0.04 2.7 0.04 0.04 5 -5 0.1 4.5 0.1 0.4 A A mA mA mA mA ICC supply current VCC = 2.7 V; VI = GND or VCC; IO = 0 A outputs HIGH-state outputs LOW-state outputs disabled - ICC additional supply current per input pin input capacitance on nOE output capacitance input diode voltage HIGH-level output voltage VCC = 2.3 V to 2.7 V; one input at VCC - 0.6 V; other inputs at VCC or GND VI = 0 V or VCC VI/O = 0 V or VCC VCC = 3.0 V; IIK = -18 mA VCC = 3.0 V to 3.6 V; IOH = -100 A VCC = 3.0 V; IOH = -32 mA Ci Co VIK VOH 2.0 3 9 -0.85 2.3 -1.2 - pF pF V V V VCC = 3.3 V 0.3 V [7] VCC - 0.2 VCC 9397 750 15192 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 -- 4 July 2005 7 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state Table 7: Static characteristics ...continued At recommended operating conditions; voltages are referred to GND (ground = 0 V); Tamb = -40 C to +85 C. Symbol VOL Parameter LOW-level output voltage Conditions VCC = 3.0 V IOL = 100 A IOL = 16 mA IOL = 32 mA IOL = 64 mA ILI input leakage current control pins data pins IOFF IHOLD VCC = 3.6 V; VI = VCC or GND VCC = 0 V or 3.6 V; VI = 5.5 V VCC = 3.6 V; VI = VCC VCC = 3.6 V; VI = 0 V power-down output current VCC = 0 V; VI or VO = 0 V to 4.5 V bus hold current on data inputs VCC = 3 V; VI = 0.8 V VCC = 3 V; VI = 2.0 V VCC = 0 V to 3.6 V; VI = 3.6 V IPU IPD IOZ power-up 3-state output current VCC 1.2 V; VO = 0.5 V to VCC; VI = GND or VCC [3] [3] [3] [8] [2] [2] Min 75 -75 500 - Typ 0.07 0.25 0.3 0.4 0.1 0.1 0.5 +0.1 0.1 130 -140 1 1 Max 0.2 0.4 0.5 0.55 1 10 1 -5 100 100 100 Unit V V V V A A A A A A A A A A power-down 3-state output VCC 1.2 V; VO = 0.5 V to VCC; current VI = GND or VCC 3-state output current VCC = 3.6 V; VI = VIL or VIH output HIGH-state; VO = 3.0 V output LOW-state; VO = 0.5 V [8] [5] [6] 0.5 +0.5 0.05 3.9 0.06 0.04 5 -5 0.1 5.5 0.1 0.4 A A mA mA mA mA ICC supply current VCC = 3.6 V; VI = GND or VCC; IO = 0 A outputs HIGH-state outputs LOW-state outputs disabled - ICC additional supply current per input pin VCC = 3 V to 3.6 V; one input at VCC - 0.6 V; other inputs at VCC or GND [1] [2] [3] [4] [5] [6] [7] [8] All typical values are at VCC = 2.5 V and Tamb = 25 C. Unused pins at VCC or GND. This is the bus hold overdrive current required to force the input to the opposite logic state. This parameter is valid for any VCC between 0 V and 1.2 V with a transition time of up to 10 ms. From VCC = 1.2 V to VCC = 2.5 V 0.2 V a transition time of 100 s is permitted. This parameter is valid for Tamb = 25 C only. ICC is measured with outputs pulled up to VCC or pulled down to ground. This is the increase in supply current for each input at the specified voltage level other than VCC or GND. All typical values are at VCC = 3.3 V and Tamb = 25 C. This parameter is valid for any VCC between 0 V and 1.2 V with a transition time of up to 10 ms. From VCC = 1.2 V to VCC = 3.3 V 0.3 V a transition time of 100 s is permitted. This parameter is valid for Tamb = 25 C only. 9397 750 15192 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 -- 4 July 2005 8 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 11. Dynamic characteristics Table 8: Dynamic characteristics GND = 0 V; Tamb = -40 C to +85 C; for test circuit see Figure 6. Symbol tPLH tPHL tPZH tPZL tPHZ tPLZ tPLH tPHL tPZH tPZL tPHZ tPLZ [1] [2] Parameter V [1] propagation delay nAx to nYx propagation delay nAx to nYx output enable time to HIGH-level output enable time to LOW-level output disable time from HIGH-level output disable time from LOW-level V [2] propagation delay nAx to nYx propagation delay nAx to nYx output enable time to HIGH-level output enable time to LOW-level output disable time from HIGH-level output disable time from LOW-level Conditions see Figure 4 see Figure 4 see Figure 5 see Figure 5 see Figure 5 see Figure 5 see Figure 4 see Figure 4 see Figure 5 see Figure 5 see Figure 5 see Figure 5 Min 1.0 1.0 1.0 1.0 1.0 1.0 0.5 0.5 1.0 1.0 1.5 1.5 Typ 2.5 1.9 3.3 2.6 2.5 1.8 1.7 1.7 2.5 1.9 2.8 2.3 Max 3.7 2.9 5.3 4.2 4.0 3.0 3.0 2.6 3.2 3.1 4.1 3.4 Unit ns ns ns ns ns ns ns ns ns ns ns ns VCC = 2.5 V 0.2 VCC = 3.3 V 0.3 All typical values are at VCC = 2.5 V and Tamb = 25 C. All typical values are at VCC = 3.3 V and Tamb = 25 C. 9397 750 15192 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 -- 4 July 2005 9 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 12. Waveforms VI input nAx 0V t PHL VOH output nYx VOL 001aad264 VM VM t PLH VM VM Measurement points are given in Table 9. VOL and VOH are typical voltage output drop that occur with the output load. Fig 4. Input (nAx) to output (nYx) propagation delays VI input nOE 0V t PZL VI output nYx VOL t PZH VOH output nYx 0V 001aad265 VM VM t PLZ VM VX t PHZ VY VM Measurement points are given in Table 9. VOL and VOH are typical voltage output drop that occur with the output load. Fig 5. 3-state output enable and disable times Table 9: VCC 3V 2.7 V Measurement points Input VM 1.5 V 0.5 x VCC Output VM 1.5 V 0.5 x VCC VX VOL + 0.3 V VOL + 0.15 V VY VOH - 0.3 V VOH - 0.15 V Supply voltage 9397 750 15192 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 -- 4 July 2005 10 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state VI negative pulse 0V tW 90 % VM 10 % tTHL(tf) tTLH(tr) tTLH(tr) tTHL(tf) VM 90 % VI positive pulse 0V 10 % 90 % VM tW 001aac221 VM 10 % a. Input pulse definition VEXT VCC PULSE GENERATOR VI DUT RT CL RL RL VO mna616 Test data is given in Table 10. Definitions test circuit: RL = Load resistor. CL = Load capacitance includes jig and probe capacitance. RT = Termination resistance should be equal to Zo of the pulse generator. VEXT = Test voltage for switching times. b. Test circuit Fig 6. Load circuitry for switching times Table 10: Input VI 3.0 V or VCC whichever is less fi tW tr, tf Test data Load CL RL VEXT tPHZ, tPZH tPLZ, tPZL tPLH, tPHL 6 V or 2 x VCC open 10 MHz 500 ns 2.5 ns 50 pF 500 GND 9397 750 15192 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 -- 4 July 2005 11 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 13. Package outline SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm SOT370-1 D E A X c y HE vM A Z 48 25 Q A2 A1 (A 3) Lp 1 bp 24 wM L detail X A pin 1 index e 0 5 scale 10 mm DIMENSIONS (mm are the original dimensions) UNIT mm A max. 2.8 A1 0.4 0.2 A2 2.35 2.20 A3 0.25 bp 0.3 0.2 c 0.22 0.13 D (1) 16.00 15.75 E (1) 7.6 7.4 e 0.635 HE 10.4 10.1 L 1.4 Lp 1.0 0.6 Q 1.2 1.0 v 0.25 w 0.18 y 0.1 Z (1) 0.85 0.40 8 o 0 o Note 1. Plastic or metal protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT370-1 REFERENCES IEC JEDEC MO-118 JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 Fig 7. Package outline SOT370-1 (SSOP48) 9397 750 15192 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 -- 4 July 2005 12 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state TSSOP48: plastic thin shrink small outline package; 48 leads; body width 6.1 mm SOT362-1 D E A X c y HE vMA Z 48 25 Q A2 A1 pin 1 index Lp L (A 3) A 1 e bp 24 wM detail X 0 2.5 scale 5 mm DIMENSIONS (mm are the original dimensions). UNIT mm A max. 1.2 A1 0.15 0.05 A2 1.05 0.85 A3 0.25 bp 0.28 0.17 c 0.2 0.1 D (1) 12.6 12.4 E (2) 6.2 6.0 e 0.5 HE 8.3 7.9 L 1 Lp 0.8 0.4 Q 0.50 0.35 v 0.25 w 0.08 y 0.1 Z 0.8 0.4 8 o 0 o Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT362-1 REFERENCES IEC JEDEC MO-153 JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 Fig 8. Package outline SOT362-1 (TSSOP48) 9397 750 15192 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 -- 4 July 2005 13 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 14. Revision history Table 11: Revision history Release date 20050704 Data sheet status Product data sheet Change notice Doc. number 9397 750 15192 Supersedes 74ALVT16240_2 Document ID 74ALVT16240_3 Modifications: * * The format of this data sheet has been redesigned to comply with the new presentation and information standard of Philips Semiconductors. In Table 8; update of the typical and maximum value of tPZH at VCC = 3.3 V 0.3 V Product specification 9397 750 03615 74ALVT16240_1 - 74ALVT16240_2 74ALVT16240_1 19980213 19970502 9397 750 15192 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 -- 4 July 2005 14 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 15. Data sheet status Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). III Product data Production [1] [2] [3] Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 16. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 18. Trademarks Notice -- All referenced brands, product names, service names and trademarks are the property of their respective owners. 17. Disclaimers Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors 19. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com 9397 750 15192 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 -- 4 July 2005 15 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 20. Contents 1 2 3 4 5 6 6.1 6.2 7 7.1 8 9 10 11 12 13 14 15 16 17 18 19 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 3 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3 Functional description . . . . . . . . . . . . . . . . . . . 5 Function table . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 5 Recommended operating conditions. . . . . . . . 6 Static characteristics. . . . . . . . . . . . . . . . . . . . . 7 Dynamic characteristics . . . . . . . . . . . . . . . . . . 9 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 14 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 15 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Contact information . . . . . . . . . . . . . . . . . . . . 15 (c) Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 4 July 2005 Document number: 9397 750 15192 Published in The Netherlands |
Price & Availability of 74ALVT16240DGG |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |